Bryant Air Conditioner Troubleshooting Guide (2024)

Common Problems with the Bryant Air Conditioner

ProblemPossible CausesSolutions
Thermostat Problems/Thermostat Miscommunication Miscommunication between the AC unit and the thermostat or Low batteries. Replace the batteries; Restart your AC unit.
Condenser Coils are Not Working Properly Wear and tear. Replace the faulty unit.
AC is Emitting Smells Underlying problem: Overheating AC; Refrigerant leak; Mold and bacteria; Etc. Identify the smell to troubleshoot.
Dirty AC General dust and debris. Clean the filter, coils, drain lines, and outdoor unit.

#1 Thermostat Problems/Thermostat Miscommunication

A common problem with Bryant air conditioners is with the temperature control thermostat. The settings on the temperature control board may not match the air temperature in the room, and this may be due to a miscommunication between the air conditioning unit and the thermostat, or the remote control may be running out of power.

In this case, check your control panel for any miscommunication issues. You can restart your air conditioning units by shutting the HVAC system down, then waiting for 5 minutes before powering it on again. If this does not fix the issue, replace the batteries of the remote control or control panel. If all else fails, contact us at Luce Aircon for a complete diagnosis and repair.

#2 Condenser Coils are Not Working Properly

Condenser coils are what hold the refrigerant as it condenses from a gas to a liquid solution. The coils may freeze up and malfunction, or leak refrigerant out of the air conditioning system. In this case, you will need to have our professional technicians inspect and repair your unit. Condenser coils may be replaced, but replacement costs are relatively high.

#3 Air Conditioner is Emitting Smells

Smells coming from the air conditioner is a sign of an underlying problem with your Bryant air conditioner. Depending on the smell, odor from your AC unit may be a cause for immediate concern. A musty odor would indicate mold growth, while a skunk-like odor means there is natural gas that is escaping through your HVAC system.

If you notice a musty or foot-like smell, chances are you simply need to clean your air filter and drain pan. However, if you notice the smell of chloroform, sulfur, ammonia, smoke, or burning plastic, then shut your unit down immediately and contact a licensed technician to check out your unit.

#4 Dirty Air Conditioner

A dirty air conditioner would have many problems with its parts and components, ranging from mold buildup, to overloading of the air conditioning system. Cleaning your AC unit at home is relatively simple: wash the air filter with soap and water, vacuum up the coils, and wipe down the exterior of your indoor unit.

Creating a cleaning routine will prevent a dirty air conditioner, and provide you with cleaner, cold air that won't strain your air conditioning system. A clean AC unit will ease up on the circuit breaker as well, and will allow air to flow properly around your room.

How to Reset Your Bryant Air Conditioner

Reset Point: Circuit Breaker

To reset your Bryant air conditioner, turn off the unit, but leave the power plug connected to the wall socket. Make your way to the circuit breaker, and locate the circuit connected to your Bryant air conditioner. Flip the circuit breaker, wait 5 minutes, then flip the switch back to its original position to reset your unit.

Bryant Air Conditioner Solutions and Troubleshooting Guide

#1 Regular Maintenance and Cleaning

Regular maintenance and cleaning of your Bryant air conditioner may fix most aircon issues, especially those caused by dirty air filters and evaporator coils. Keep a schedule to clean your entire unit, as well as a schedule of battery changes for the main control board. Have your unit professionally checked at least twice a year for optimal maintenance and upkeep.

#2 Fix Any Issue Immediately

Contact us at Luce Aircon for cleaning, diagnostics, and repairs. We'll fix any issue you have with your Bryant air conditioners before they damage your unit, and lead to bigger problems later on. Having aircon issues repaired immediately while they're still small issues will prevent irreversible damages later on, and may save you the costs of purchasing a new unit!

Always have your air conditioners repaired by a trusted and licensed technician. At Luce Aircon, we train our HVAC professionals so they have the experience and expertise to tackle any model, brand, or type. You can't go wrong with our professional maintenance services!

#3 Avoid Overloading the Circuit Breaker Box

As with any electrical device, avoid overloading the circuit breaker where your air conditioner is connected to. Not only will this prevent your fuse box from overloading, it will prevent damage to your Bryant air conditioner and Bryant furnace. Your AC unit will most likely have an overload protector to prevent damages, but this fail-safe may also malfunction over time.

Common Error Codes

Error CodeMeaning
Rapid continuous flashing Standard Thermostat Control
16 System Communications Failure
25 Invalid Model Plug
31 High Pressure Switch Open
32 Low Pressure Switch Open
45 Control Fault
46 Brown Out
47 No 230v at Unit Measured at L1 and L2 on circuit board
53 Outdoor Air Temp Sensor Fault
55 Outdoor Coil Sensor Fault
56 Thermistors out of range
71 Low Stage Thermal Cut-out
72 High Stage Thermal Cut-out
73 Contactor Shorted
74 No 230v at Compressor
75 Low Stage Did Not Start
76 Low Stage Did Not Start 3 times
77 High Stage Did Not Start
78 High Stage Did Not Start 3 times
81 Low Stage Thermal Lockout
82 High Stage Thermal Lockout

Maintaining Your Bryant Air Conditioner

When in doubt, a licensed technician from our team of HVAC professionals in Luce Aircon will be able to provide you with the best aircon services to keep your unit in tip top condition. Feel the difference as our technicians work to repair and clean Bryant air conditioner!

Check out our article on Arctic King aircon troubleshooting.

Bryant Air Conditioner Troubleshooting Guide (2024)

FAQs

Do Bryant air conditioners have a reset button? ›

Bryant air conditioners are no different. However, unlike other companies that manufacture air conditioners, the brand doesn't have a reset button on the air conditioner. You have to reset the device by resetting the circuit breaker in your house.

Why is my Bryant AC not blowing cold air? ›

Troubleshooting Your Home Air Conditioner

Check Thermostat Settings: Make sure it's set to 'cool' and not 'heat'. Sometimes the simplest issues are the cause. Dirty Filters: If your thermostat is fine, check your filters. A dirty filter restricts airflow, causing inefficient cooling.

Where is the reset button on a Bryant thermostat? ›

Step 1: Open the keypad door. Step 2: Simultaneously press and hold the up and down buttons on the right side of your keypad for five minutes.

Why does my Bryant thermostat keep shutting off? ›

This could be due to several reasons – dirty air filters, blocked air supply vents, and dirty blower winds. Not changing the filters often could lead to clogged filters, resulting in overheating of the heat exchanger. A dirty blower wheel is to be blamed in case of rapid switching on and off of your furnace.

Where is the AC reset button located? ›

If your AC unit has a reset button on the condenser unit, you simply press it and hope that the problem resolves. Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC's reset button is typically red and visible, so it should be easy to spot.

How to do a hard reset on AC? ›

How to Reset an Air Conditioner
  1. Power down your AC. Start at your circuit breaker panel and flip the breaker that powers your AC. ...
  2. Find the button. Most air conditioning units are equipped with a reset button. ...
  3. Hold down the reset button for 3 to 5 seconds and then release.
  4. Restore power to your AC.

Why is my AC running but not getting cold? ›

There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.

What is the most common cause of AC not blowing cold air? ›

Your air filters need to be replaced. If your air conditioner is not blowing cold air but is running, try changing the filter. Air filters have a pretty dirty job. They trap dirt, dust, and other airborne particles before they reach your home's internal airflow.

How do I fix my AC not blowing cold air in my house? ›

How to Fix an AC Not Blowing Cold Air
  1. Power Problems.
  2. Change the Filter.
  3. Blocked Return.
  4. Open Interior Doors.
  5. Clogged or Damaged Ducts.
  6. Dirty Compressor Coils.
  7. Dirty Evaporator Coils.
  8. Broken Wires.

How do you know if you need to reset your thermostat? ›

You will know when a reset is necessary because your thermostat will not be regulating the temperature of your home as well as it was before. If, however, you reset your thermostat and are still experiencing issues, it may be time to call in a professional.

What is the hold button on a Bryant thermostat? ›

By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming. Convenient, right?

What is the temperature reset control? ›

Outdoor temperature reset is a control strategy that continuously adjusts heating system supply water temperatures to compensate, providing more heat when it's colder and less heat when it's warmer.

Why does my thermostat keep shutting off? ›

The wiring could be old and need replacing, it might need new batteries, or it could be the location of your thermostat. If your thermostat is placed close to a heat source such as direct sunlight or a heat register, it will skew the temperature reading causing the thermostat to turn on and off irregularly.

Why wont my thermostat stay on? ›

Try replacing the batteries, then check for a blown fuse or tripped breaker in the electrical panel. If the thermostat is still unresponsive, make sure the breaker is shut off and remove the cover.

Why does my air conditioner thermostat keep resetting? ›

Solution: Switch out your batteries. It can be as simple as switching out the batteries on your thermostat device. This could also be the reason your screen can go blank sometimes. Thankfully, most thermostats should tell you when the time comes to replace them.

Do all outside AC units have a reset button? ›

Outdoor AC Unit Reset Button: Many outdoor air conditioning units come equipped with a reset button which needs to be pressed in order for them to function properly after being turned off for any reason (e.g., maintenance).

Will an AC unit reset itself? ›

Wait for 30 minutes before turning your unit back from the thermostat. This gives your system plenty of time to reset its own internal circuit breaker.

How do you reset an air conditioner after a power outage? ›

How to restart your air conditioner after a power outage
  1. Turn off your air conditioner at the thermostat. ...
  2. Turn off your air conditioner at the circuit breaker. ...
  3. Turn your air conditioner back on at the circuit breaker. ...
  4. Wait for 30 minutes. ...
  5. Turn your air conditioner back on at the thermostat.
May 10, 2022

Top Articles
Latest Posts
Article information

Author: Neely Ledner

Last Updated:

Views: 6240

Rating: 4.1 / 5 (42 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.